Façade SG 62
Choose your product
This is a traditional system also known as the Stick system.It fixes the glazing to the load bearing profiles by using clips. This system requires an insert that is fitted in to the glazing chamber (U profile). The combination of the clip plus the insert allows for the glazing to be fixed on all four sides. Following the installation of the clips, the gasket between the glazings must be sealed with ultra violet resistant silicone. The system also incorporates a lower sealing gasket over which the cord is ‘supported’ on the inside.
» Glazing
Maximum glazing 64 mm*
Mínimum glazing 6 mm
*Consult us for greater thicknesses
» Sections
Mullion 62 mm
Transom 62 mm
» Profile thickness
Mullion 2.5 y 2.8 mm
Transom 2,8 mm
» Maximum weight
800 Kg
Consult maximum weight and dimensions according to typologies
» Finishes
Colour powder coating (RAL, mottled, rough)
According to Qualicoat Standard > 60 microns
Wood effect powder coating
According to Qualideco Standard
Anodized
According to Ewwa Euras
Standard Class 15
Optionally Class 20 y 25
» Transmittance
Ucw from 0.6 (W/m²K)
» Air permeability
(UNE-EN 12152) Clase AE
» Water tightness
(UNE-EN 12154) Clase RE1500
» Wind resistance*
(UNE-EN 13116) APTO
» Impact resistance
(UNE-EN 14019) Clase I5, Clase E5
Reference test 4,12 x 4,32 m
Photo gallery of the system: